Granulation of Metals as One of The Methods for Production of The Unique New Materials

Volume 1 - Issue 3

Ivan V Kazachkov^*

Received: April 04, 2019;   Published: April 26, 2019

DOI: 10.32474/MAMS.2018.01.000114

Full Text PDF

To view the Full Article   Peer-reviewed Article PDF

Abstract

Basics of the development and testing of the new granulation machine are presented. The production of the uniform by size and form particles (granules) cooled with a high rate, to be amorphous or close to the amorphous materials, is organized as controlled film flow and its disintegration into drops. Such granules of the given size and form are under demand in material science for creation of the new unique materials. The new patented granulation devices tested and implemented are described. The developed methods and devices can be used for production of the amorphous or close to the amorphous granules in a wide range of the given sizes, with a narrow deviation of size (max 50% from average size). There are no analogues of such granulation machines.

Keywords: Granulation Machine; Rapid Solidification; Amorphous; Film Flow; Drops; Granules

Abstract| Introduction and Statement of the Problem| The Amorphous Metals| Granulation of The Middle-Temperature Melts Base on The Controlled Jet/Film Flow Disintegration into The Drops with Their Further Rapid Solidification| Film Flow Granulation Methods and Devices| Conclusion| References|