Importance of Spindle Speed in Ring Frame
Volume 3 - Issue 5
Redwanul Islam1*, Amit Chakrabortty1, Joyjit Ghosh1, Tareq Iqbal2 and Tanvir Hossen3
- 1Lecturer, Department of Textile Engineering, Ahsanullah University of Science and Technology(AUST), Bangladesh
- 2Lecturer, Department of Textile Engineering and Management, BGMEA University of Fashion and Technology, Bangladesh
- 3Lecturer, Department of Textile Engineering, Jashore University of Science and Technology (JUST), Bangladesh
Received: March 31, 2021 Published: April 14, 2021
*Corresponding author: Redwanul Islam, Lecturer, Department of Textile Engineering, Ahsanullah University of Science and Technology (AUST),Bangladesh
DOI: 10.32474/LTTFD.2021.03.000173
Fulltext
PDF
To view the Full Article Peer-reviewed Article PDF
Abstract
We all know that in the spinning system the ring frame plays a vital role, so that we want to highlight the importance of the ring
frame in this paper. There are many modern spinning systems but the product which we get from the ring frame is much better than
other spinning systems. For making good quality yarn, we need to control the spindle speed because sometimes it is shown that the
speed of spindle is changing for lack of maintenance and lack of monitoring. If we properly monitor them and control the spindle
speed, then we get a proper resulted count. It is observed that when the spindle speed is 15000 rpm for average ring yarn it shows
the optimum quality.
Keywords: Spindle; ring frame; RPM
Abstract|
Introduction|
Research Methodology|
Research Limitations|
Conclusion|
References|