Development of Woven Fabrics with High-Count and
Cooling Collagen
Volume 3 - Issue 1
Blended Yarns*, FL Huang, JY Huang and KB Cheng
-
Author Information
Open or Close
- Department of Fiber and Composite Material, Textile and Material Industrial Research Center (TMIRC), Taiwan
*Corresponding author:
Blended Yarns, Department of Fiber and Composite Material, Textile and Material Industrial Research
Center (TMIRC), Taiwan
Received: December 06, 2018; Published: December 14, 2018
DOI: 10.32474/LTTFD.2018.02.000156
Full Text
PDF
To view the Full Article Peer-reviewed Article PDF
Abstract
The 60’s cooling collagen viscose rayon blended yarn was fabricated by using ring spinning system. The blended yarn
constitutions included 50wt% of regular viscose rayon with 1.5d and 38mm, 35wt% of cooling viscose rayon with 1.25d and 38mm,
and 15 wt% of collagen viscose rayon fibers with 1.5d and 38mm. As mension above 60’s cooling collagen viscose rayon ring yarn
was used as filling yarn. The 60’s Model Rayon(60wt%) ring yarn was used as warp yarns. The grey cloth specifications included
warp density 198 ends/ 2.54cm and filling density 146 picks/2.54cm as well as the fabric width is 170cm which was produced by
Picanol air-jet shuttleless loom. From the experimental results, the finished woven fabric was fabricated throuth souring, bleaching,
dyeing, finishing, and heat setting processes. The color fastness of woven fabrics with high-count and cooling collagen achieved
grade 4-5 according to CNS1494 testing standard.
Abstract|
Introduction|
Experiment|
Results and Discussion|
Conclusion|
Acknowledgement|
References|