Advanced Ventilation Systems−Theory,
Practice, Limitations and Solutions
Volume 1 - Issue 1
SBin Yang1,2*, Zhang Lin3 and Angui Li1
-
Author Information
Open or Close
- 1 School of Mechanical Engineering, Xiangtan University, China
- 2 Department of Engineering Mechanics, Hohai University, PR China
- 3 Department of Civil and Environmental Engineering, Tokyo Institute of Technology, Japan
*Corresponding author:
Bin Yang, School of Environmental and Municipal Engineering, Xi’an University of Architecture and Technology, 710055, Xi’an, China
Received: January 25, 2018; Published: January 29, 2018
DOI: 10.32474/TCEIA.2018.01.000103
Full Text
PDF
To view the Full Article Peer-reviewed Article PDF
Abstract
The task of HVAC systems is to offset indoor thermal load and/
or ventilation load. Indoor thermal load can be offset by either
convective-dominant way or radiant-dominant way. In convective
dominant way, system recirculated air (RA) is thermally conditioned
in term of temperature and humidity. Indoor ventilation load has
to be offset by convective dominant way, in which outdoor air is
filtered, thermally conditioned and thus it becomes fresh air (FA) to
dilute indoor pollutants such as CO2. FA can be supplied in different
ways separately or compositely with RA, which is the main focus of
this paper.
Abbrevations: RA: Recirculated Air; FA: Fresh Air; MV: Mixing Ventilation; DV: Displacement Ventilation; UFAD: Under Floor Air
Distribution; ACV: Air Curtain Ventilation; TAC: Task Ambient Conditioning; PV: Personalized Ventilation; SV: Stratum Ventilation;
IAJS: Intermittent Air Jet Strategy
Editorial|
References|