Si-Psa Tape with the Addition of Dolomite
Volume 1 - Issue 5
Adrian Krzysztof Antosik* and Zbigniew Czech
-
Author Information
Open or Close
- Institute of Organic Chemical Technology, West Pomeranian University of Technology Szczecin, Poland
*Corresponding author:
Adrian Krzysztof Antosik, Institute of Organic Chemical Technology, West Pomeranian University of
Technology Szczecin, Poland
Received: February 07, 2018; Published: February 19, 2018
DOI: 10.32474/AOICS.2018.01.000121
Full Text
PDF
To view the Full Article Peer-reviewed Article PDF
Abstract
It is well known that tapes on the silicone pressure-sensitive adhesives base are high quality products used for special applications.
Due to the excellent performance characteristics such as high adhesion, cohesion and tack, while high chemical and environmental
conditions resistance, the choice of the layer protecting the adhesive film is a big problem. Due to this, expensive fluoridated films are
used as protective layers. In order to reduce costs, a suitable bending of the protective layer was introduced (limitations of the contact
surface of the adhesive film with a protective layer) which reduces the protection of the adhesive film. The introduction of dolomite
particles into the adhesive film is intended to facilitate the removal of the protective layer, while maintaining the level of protection at
the level of expensive films.
Keywords: Silicone pressure sensitive ahesives; Easy peel; Dolomite
Abstract|
Introduction|
Material and Methods|
Results and Discussion|
Conclusion|
References|